ROLLAND SERIES BARSTOOLS
4pcs Seat Iron Ring Cross Wood Legs 6 Cross Wood 4 4 4 40 Ex4 Washer Fx4 4 Gx4 4 Screw Hole Stickers
6
Attention: 1. The notch of ④ is facing downwards, while the hole at its top is facing upwards. 2. Tighten the screws to 50% in this step. E 2 2 E 2 2 E E Attention: 1. The notch of ⑤ faces upwards, and the hole at its top also faces upwards. 2. Tighten the screws to 50% in this step.
Rotate the turntable to cross and separate the upper and lower iron plates, aligning the four holes in the lower iron plate with the four screw holes on the wooden frame.
5 6 The screws in Step 1 and Step 2 must be tightened to 100% now.
7 F F 8 G G G 8
