ABM-HOOD & ABM-HOOD-200 QUICK START AND TROUBLESHOOTING GUIDE Patented Wireless Technology
QUICK START GUIDE APP DOWNLOAD & SETUP The CPS Link app will work with older smart phones and tablets but has been optimized for use with Apple iPhones SE, 8 and 8 Plus or newer, and iPads with operating system iOS 9.3 or newer. For phones and tablets with Android operating systems, the CPS Link app has been optimized for all Bluetooth Smart compatible devices with operating system 7.0-7.1.2, (Nougat) or newer. 1. To download CPS Link™ app go to the App Store or Google Play 2.
QUICK START GUIDE (CONT’D) INSTALL METER 1. If using ABM-200, attach threaded mic jack metal adapter (chrome metal pin) to meter, then plug meter into socket inside control box opening. 2. If using ABM-100, plug meter into socket inside control box opening. HANDS FREE MOBILE PHONE USE 1. For greater convenience, mount your mobile phone to the adjustable [2-3/8" to 5-5/8" (60 to 90 mm)] spring loaded base. If using ABM-100, use cable inside smartphone platform and connect to headphone jack on smartphone.
QUICK START GUIDE (CONT’D) REGULAR TEST [35 ~ 720 CFM (59 ~1,223 M3/H)] 1. From the ABM EasyHood screen, select REGULAR TEST. 2. Place hood over grille to capture airflow readings. 3. App will calculate airflow and other values. 4. When test is done, press STOP on mobile device screen or the test will end automatically after 30 seconds. 1 2 ABM EasyHood Main Screen MAX Capture Airflow Readings 3 Temperature Wet Bulb Dew Point RH % AVG 4 MIN Airflow Volume (CFM or M3/H) 5. Press STOP to end test.
QUICK START GUIDE (CONT’D) LOW VOLUME TEST [7 TO 50 CFM (12 TO 85 M3/H)] 1. Select LOW VOLUME from main screen on ABM-EasyHood app. 2. Insert Low Volume Adapter into WIDE portion of Vortex grille (see photo below). 3. Place hood over grille to capture airflow readings. 4. App will calculate airflow and other values. 5. When test is done, press STOP on 1 mobile device screen. 6. Obtain test report from Job File.
TROUBLESHOOTING GUIDE (GRILLES UP TO 24" X 24") 2 1 4 Snap 3 TO REPLACE ABM-200 BATTERY 1. Squeeze BOTH sides of rubber "skin" and push UPWARDS simultaneously. 2. Pull "skin" over BACK of the housing to expose coin cell battery compartment 3. Open battery compartment and replace coin cell. 4. Reinstall "skin" over molded housing.
TROUBLESHOOTING GUIDE (CONT’D) PROBLEM SOLUTION CPS Link App Ensure mobile device is Bluetooth compatible. And, Bluetooth setting is ON in mobile device 1. CPS Link App Crashes Turn-off and restart mobile device in case of other conflicting apps running Delete app and reinstall on your mobile device Ensure wireless device is CPS brand only 2.
TROUBLESHOOTING GUIDE (CONT’D) PROBLEM SOLUTION ABM-100 (Mounted In ABM EasyHood) 1. Won't provide readings Meter must be connected to mobile device phone jack via supplied cable (inside storage compartment) ABM-200 Meter (Mounted in ABM Easyhood) Ensure meter properly paired to mobile device 1. Won't provide readings Replace ABM-200 coin cell battery Fan or blower motor output varies 2.
TROUBLESHOOTING GUIDE (CONT’D) PROBLEM SOLUTION ABM-HOOD (Must Be Used With Separately Purchased ABM Meters) 1. Won't provide consistent readings from same vent 2. Low (Or Regular) Airflow-Readings seem inaccurate Hold hood firmly over entire grille area to ensure all airflow is captured Fan or blower motor output varies Install supplied Low Volume Airflow plate (see Owner's Manual) for airflow ranging from 7 to 100 CFM.
NOTES
For latest updates, or to view the full EasyHood Owner's Manual or other product information, go to: www.cpsproducts.com #79-132 Rev.
