Technical data

51
Remarks：The LCD display is shown as follows when PV parallel mode is
selected.
Upv 360.0V
Ipv 14.7A
Figure 5-9 Operation information indication (PV parallel mode)
5.4.2 Alarm
As described before, if a fault occurs during normal operation of the
inverter, corresponding fault messages will be indicated in “2 Alarm” menu in
addition to the sound and light alarms. Move the cursor to “2 Alarm” and press
ENT
to check out the specific fault information, as shown in Figure 5-10.
2 Alarm
No Alarm
EepromErr
Protect0010
…
No
Yes
Figure 5-10 Alarm / failure information
5.4.3 History
Move the cursor to “3 History” in the main interface. Press
ENT
to check
the history information, as shown in Figure 5-11. There are 4 submenus in “3