Technical data

70
PV array has adequate energy. After all conditions are met, the inverter will
enter grid-tied power generation mode. While in grid-tied power generation,
the inverter can detect the power grid at all times, and also keep the
photovoltaic array output in maximum power point tracking (MPPT) mode. In
case of any abnormity, the inverter will enter the protection program
immediately. In low light conditions when power generation is not enough to
keep the inverter in operation, the inverter will enter standby mode. When the
voltage of PV array changes and becomes stable and higher than the required
set value, the inverter will attempt to start grid-tied power generation again.