MSDS

Page 3 of 6 Direct Fire Crack & Joint Filler
carbon dioxide.
Special Protective Equipment and Precautions for Firefighters: Wear full protective clothing, including
self-contained breathing apparatus (Positive Pressure/Pressure Demand), helmet, and face mask.
Section VI – ACCIDENTAL RELEASE MEASURES S
Personal Precautions, Protective Equipment and Emergency Procedures: Avoid skin and eye contact,
use proper protective equipment recommended in section 8.
Methods and Materials for Containment and Cleanup: Contain spill and dike with inert material (sand,
sawdust, dirt, etc.). Place in closed container for proper disposal. Avoid runoff to waterways and sewers.
Dispose of in accordance with local regulations.
Section VII – HANDLING AND STORAGE S
Precautions for Safe Handling: Store in a dry area, avoid eye contact and wash thoroughly after handling
Conditions for Safe Storage, Including Incompatibilities: Keep container closed and upright to prevent
leakage. Store in a cool, dry, ventilated area. Avoid freezing. Keep container upright to prevent leakage.
Section VIII – EXPOSURE CONTROLS / PERSONAL PROTECTION S
Exposure Guidelines
Component
ACGIH TWA (mg/m³)
OSHA PEL (TWA) (mg/m3)
Petroleum Asphalt
0.5 mg/m³
-
Engineering Controls: Ensure adequate ventilation
Individual Protection Measures
Eyes/Face: Safety goggles
Skin: Gloves
Respiratory: None required if good ventilation is maintained. This product is an emulsified,
encapsulated mixture which greatly reduces the likelihood of exposure to hazardous particles.
Hygienic controls: Wash thoroughly with soap and water before eating or drinking. Wash
contaminated clothing.
Section IX – PHYSICAL AND CHEMICAL PROPERTIES S
Appearance: Black Solid Upper Explosive Limit: N/A
Physical State: Solid Lower Explosive Limit: N/A
Odor: Asphaltic odor Vapor Pressure: N/A
Odor Threshold: N/A Vapor Density: Heavier than air
pH: N/A Specific Gravity: 1.05-1.25