MSDS

Page 4 of 6 DIRECT FIRE CRACK & JOINT SEALANT
Local Exhaust: Required
Mechanical (general): Required
Special: N/A
Other: N/A
RESPIRATORY PROTECTION:
Use only with adequate ventilation. If ventilation is inadequate, wear approved respiratory
equipment.
PROTECTIVE GLOVES: wear gloves.
EYE PROTECTION: wear safety glasses, goggles, or face shield.
OTHER PROTECTIVE EQUIPMENT: Wear suitable protective clothing
APPEARANCE & ODOR: Black semi-solid PHYSICAL STATE: semi-solid
BOILING POINT: >600° F FREEZING POINT: N/A
MELTING POINT: 160-220
o
F %VOLATILE (by Wt.): N/A
VAPOR PRESSURE: N/A THRESHOLD ODOR: N/A
SPECIFIC GRAVITY: 1.0 - 1.3 VAPOR DENSITY: N/A
SOLUBILITY IN WATER: No VOC: 0 g/L
EVAPORATION RATE: Negligible
STABILITY: Stable
CONDITIONS TO AVOID: Do not expose fumes from heated product to sources of ignition.
INCOMPATIBILITY (materials to avoid): Strong oxidizing agents.
HAZARDOUS POLYMERIZATION: Will Not Occur
HAZARDOUS DECOMPOSITION PRODUCTS: Hydrogen Sulfide, Sulfur Dioxide, Carbon Dioxide,
Carbon Monoxide and other unidentified hydrocarbons
Component Name
Concentration
CAS
Data
Asphalt Cement
100 %
8052-42-4
Acute oral toxicity: LD50 rat
Dose: 5,001 mg/kg
Acute dermal toxicity: LD50 rat
Dose: 2,001 mg/kg
Component: Asphalt:
NTP: This component, Asphalt (CAS-No.: 8052-42-4), may contain trace amounts of benzene, a
chemical known to cause cancer.
IARC: Asphalt (Bitumen) (CAS-No.: 8052-42-4) Group 2B possibly carcinogenic to humans.
OSHA: This component, Asphalt (CAS-No.: 8052-42-4), may contain trace amounts of benzene,
Section IX – PHYSICAL AND CHEMICAL PROPERTIES
Section X – STABILITY AND REACTIVITY
Section XI – TOXICOLOGICAL INFORMATION