Quick Start Guide

Introduction
This document describes the MC20BT Bluetooth Low Energy Module and provides setup and
installation information as well as reference to other compatible Cradlepoint products
Before You Begin
The MC20BT Bluetooth Low Energy Module is compatible exclusively with Cradlepoint products and
requires an active NetCloud Subscription for proper functionality.
Product Compatibility
The following Cradlepoint endpoints are compatible with the MC20BT Bluetooth Low Energy Module:
E300 Series Routers
E3000 Series Routers
Setup
Refer to the following steps to install and configure the MC20BT Bluetooth Low Energy Module.
STEP 1: Check box contents.
The MC20BT may be purchased individually or packaged with a compatible Cradlepoint endpoint. The
following may be included in the package:
o [1] MC20BT Bluetooth Low Energy Module
o [1] Bluetooth antenna
STEP 2: Install the MC20BT Bluetooth Low Energy Module.
1. Power off the Cradlepoint endpoint.
2. Align the plug-in end of the MC20BT with the appropriate
expansion port on the endpoint and connect the module to the
endpoint.
3. Hold the endpoint with one hand and the module with the
other and press the two devices together firmly to ensure
proper connection.
Expansion slot on the Cradlepoint E3000 router.