Specifications

Select from the following tabs:
WiFi Radio #1 Settings (2.4 GHz)
WiFi Radio #2 Settings (5 GHz)
Ethernet Port Configuration
VLAN Interfaces
Wireless (WiFi) Network Settings
Each wireless radio (2.4 GHz and 5 GHz) can broadcast as many as four SSIDs (service set identifiers – the names for WiFi networks). One primary WiFi network is enabled by
default, while you may have enabled a second guest network when using the First Time Setup Wizard. You have the ability to change the settings for either of these networks
and/or enable additional networks.
Wireless Radio: Enable/Disable. (Default: Enabled). Leave enabled unless you don’t want any WiFi networks broadcast from your router.
Select a WiFi network and click Edit to change the settings.
Wireless Network Editor
CradlePoint AER 2100 – Manual
07/03/2014
81