Operation Manual

Quick Leave Mode: Disable quick leave mode if it's vital that the daemon should act exactly as a real multicast client on
the upstream interface. However, disabling this function increases the risk of bandwidth saturation.
By default, enabling multicast proxy enables a multicast connection with devices within the LAN. In rare cases, additional
IP address ranges need access to the multicast streams. Click Add and input the IP Address and Netmask for an
additional IP address range.
Schedule
Set up a schedule for this network interface. This allows an interface to be enabled or disabled during specific hours of a
day. For example, use this to limit a hotspot network to business hours.
Schedule Service: (Default: Disabled.) Select to enable. This will open a configurable chart for setting the schedule.
100