Operation Manual

Each hour of the week is represented by a black or gray square. Black represents disabled, while gray represents
enabled. Hover over a square to reveal the hour it represents. Click on the squares to toggle between black and gray.
In the example shown, the network is enabled from 8-5 on Monday through Friday, but disabled at all other times.
VRRP
NOTE: VRRP requires a feature license. Go to System Settings → Feature Licenses to enable this feature. VRRP is
included with an ECM Prime subscription.
VRRP (Virtual Router Redundancy Protocol) allows you to associate multiple routers with one LAN so that if the primary
physical router fails, the LAN will keep the same settings via the virtual router.
Enable VRRP: Select to enable VRRP configuration options.
Virtual Router IP: IP address of the virtual router. This must be distinct from the IP address of any physical router
associated with the virtual router.
Virtual Router ID: Identifying number of the virtual router. (Range: 1-255)
Router Priority: Failover priority level of this physical router. The physical router with the highest priority number will
have primary ownership of the virtual router. (Range: 1-254)
101