Operation Manual

WAN Fault Priority: This optional value sets the failover priority of this router when no WAN connection is available. If
the value matches the normal router priority, WAN connection state will not be considered. If the value is empty (the
default), the router will always give up ownership of the virtual IP and let a new master take over when no WAN
connection is available.
Advertisement Interval: Sets the amount of time (in seconds) between VRRP advertisements, which communicate the
router status. The default of 1 second is standard.
Initial Virtual Router State: This controls the initial VRRP failover state for this physical router: choose Master or
Backup. This sets up the virtual router association more quickly than the Router Priority level, but the Router Priority
assignment will eventually overrule this if there is a discrepancy.
Authentication: VRRP Authentication Method. This is for legacy purposes: VRRP Authentication has been deprecated
as of RFC 3768. Select None or Simple. If you select Simple, input a VRRP group password.
Provide Virtual IP in DHCP leases: Select this to automatically set the DHCP default gateway address and DNS server
address to the virtual IP in DHCP leases provided on this network.
STP
NOTE: STP requires a feature license. Go to System Settings → Feature Licenses to enable this feature. STP is
included with an ECM Prime subscription.
102