Operation Manual

VID: An integer value that is the Virtual LAN ID.
Ethernet Group: Select the LAN port(s) with which you want to associate the VLAN ID from a dropdown list. Your
Ethernet group must be created separately under Ethernet Port Configuration.
Click Submit to save your configured VLAN.
PSE Configuration
The AER3100 is compatible with the IEEE802.3af/at standard(s) and supports a 62W total power budget that can be
used across up to four Ethernet ports to support various compliant Class I, II, III and IV devices (PD).
To configure your Power over Ethernet (PoE) settings, select the PSE (Power Sourcing Equipment) Configuration tab.
All PoE ports are enabled by default. To disable PoE for a port or to change port priority, select the port and click Edit.
Set your desired parameters, then click Submit
NOTE: If PoE is used for one or more high-power devices (up to 30W each), there will not be sufficient power remaining
to power devices in remaining Ethernet ports. By default, priority is assigned to lower-numbered ports.
109