Operation Manual

Load Balance: If this is enabled, the router will use multiple WAN interfaces to increase the data transfer
throughput by using any connected WAN interface consecutively. Selecting Load Balance will automatically start
the WAN interface and add it to the pool of WAN interfaces to use for data transfer. Turning off Load Balance for an
active WAN interface may require the user to restart any current browsing session.
Enabled: Selected by default. Deselect to disable an interface.
Click on the small box at the top of the list to select/deselect all devices for either Load Balance or Enabled.
Click on a device in the list to reveal additional information about that device.
Selecting a device reveals the following information:
State (Connected, Available, etc.)
Port
UID (Unique identifier. This could be a name or number/letter combination.)
IP Address
Gateway
Netmask
Stats: bytes in, bytes out
Uptime
Click “Edit” to view configuration options for the selected device. For 3G/4G modems, click “Control” to view options to
activate or update the device.
WAN Configuration
Select a WAN interface and click on Edit to open the WAN Configuration editor. The tabs available in this editor are
specific to the particular WAN interface types.
115