Operation Manual

Connect Method
Select the connection type that you need for this WAN connection. You may need to check with your ISP or system
administrator for this information.
DHCP (Dynamic Host Configuration Protocol) is the most common configuration. Your router’s Ethernet ports are
automatically configured for DHCP connection. DHCP automatically assigns dynamic IP addresses to devices in
your networks. This is preferable in most circumstances.
Static allows you to input a specific IP address for your WAN connection; this should be provided by the ISP if
supported.
PPPoE should be configured with the username, password, and other settings provided by your ISP.
If you want to use a Static (Manual) or PPPoE connection, you will need to fill out additional information.
Static (Manual):
IPv4 Address
Subnet Mask
Gateway IP
Primary DNS Server
Secondary DNS Server
PPPoE:
124