Operation Manual

Filter Criteria
If you are creating a new rule, begin by setting the Filter Criteria. Create a name for your rule and the condition for
which the rule applies:
Rule Name: Create a name meaningful to you. This name is optional.
Make a selection for "When," "Condition," and "Value" to create a condition for your rule. The condition will be in the form
of these examples:
When Condition Value
Port is USB Port 1
Type is not WiMAX
When:
Port – Select by the physical port on the router that you are plugging the modem into (e.g., "USB Port 2").
Manufacturer – Select by the modem manufacturer, such as Sierra Wireless.
Model – Set your rule according to the specific model of modem.
Type – Select by type of Internet source (Ethernet, LTE, Modem, Wireless as WAN, WiMAX).
Serial Number – Select 3G or LTE modem by the serial number.
MAC Address – Select WiMAX modem by MAC Address.
Unique ID – Select by ID. This is generated by the router and displayed when the device is connected to the
router.
Condition: Select “is,” “is not,” “starts with,” “contains,” or “ends with” to create your condition’s statement.
Value: If the correct values are available, select from the dropdown list. You may need to manually input the
133