Operation Manual

Daily
Weekly
Monthly
Cycle Start Date: Select the date you wish the rule to begin. This date will be used to track when the rule will reset.
Shutdown WAN on Cap: If selected, the WAN device will shut down when the assigned usage is reached. A cycle reset
or a rule deletion will re-enable the device.
Send Alert on Cap: An email alert will be generated and sent when the assigned usage is reached.
WARNING: The SMTP mail server must be configured in System Settings → Device Alerts.
Custom Alert: When checked you enable a second email to be configured for a percentage of the assigned usage.
Percent of Usage (1-1000): If selected, a custom alert will be sent when your data usage reaches this percentage of
your usage cap. For example, you could set this at 90% so that you know when your usage is nearing 100% of the cap.
Template Configuration
Templates allow you to control multiple WAN devices with the same rule. Each WAN device that matches a template will
automatically have its own rule created.
For example, you can set a template rule for all mobile data modems that causes your router to send an alert after 1000
MB of usage in a month. When you attach a new 4G USB modem, your template will immediately create a new Data
Usage Rule for the attached modem that sends the alert as specified.
Click Add to configure a new Template rule.
Create a Template Name that you can recognize. The template will apply to one of the following WAN types:
All WAN
137