Operation Manual

Network Address – This is the network address that is the destination of the route. This should be set to the
network address at the remote side of the tunnel.
Netmask – This is the corresponding subnet mask of the network being defined.
Network Mobility (NEMO)
NOTE: NEMO requires a feature license not included with ECM Prime. Go to System Settings → Feature Licenses to
enable this feature.
Network Mobility (NEMO) is an Internet standards track protocol defined in RFC 5177. The protocol allows session
continuity for every node in a mobile network as the network moves.
NEMO requires a service provider, e.g. Verizon Wireless Private Network with DMNR (Dynamic Mobile Network
Routing). Your NEMO service provider will define many of the settings for your NEMO configuration.
Once you have a NEMO service provider and a valid feature license, add networks to the Networks Routed by NEMO
section by first clicking Add. In the popup window, input:
Network Address
Netmask
The Network Address and Netmask, or subnet mask, together define a range of IP addresses that comprise the local
network you want associated with the NEMO settings.
145