Operation Manual

Network Mobility (NEMO) Settings
Home IP Address and Home Netmask – These may be provided by your NEMO service provider. The IP address is a
placeholder, “dummy” address; any IP address can be used (1.2.3.4 is common).
Home Agent IP Address, Home Agent Password, and Home Agent SPI – Your home agent will be defined by your
NEMO service provider.
Renew Registration – The NEMO network regularly re-registers with the home agent (e.g., every 30 seconds). Specify
the number of seconds between each check-in.
MTU – Override the maximum transmission unit (MTU) of the NEMO tunnel. The TCP MSS (maximum segment size) is
automatically derived from the MTU. Leave blank to rely on Path MTU Discovery.
NHRP Interfaces
NOTE: NHRP Configuration requires a feature license not included with ECM Prime. Go to System Settings → Feature
146