Operation Manual

Once you have a valid feature license, click Add to create a new OpenVPN tunnel. Click Edit to make changes to an
existing tunnel.
Add/Edit Tunnel – General
Tunnel Enabled – Click to enable/disable this tunnel.
Tunnel Name – Enter a name to uniquely identify this tunnel.
Tunnel Mode – Select which mode this tunnel endpoint is required to be. Choose from the following:
Client
Server
Local Tunnel Address – Enter the IP Address of the LNS (tunnel server) peer.
Remote Tunnel Address – Enter the IP Address of the LNS (tunnel server) peer.
Support IPv6 Tunnels – Allow IPv6 traffic to be forwarded over this tunnel. If you select this option, also input an
149