Operation Manual

IPv6 Tunnel Address and Tunnel Prefix Length for IPv6.
Tunnel Protocol – Choose UDP or TCP.
Configuration Mode – Simple configuration requires the least amount of configuration for the tunnel, while
advanced allows for a more detailed setup.
Ping – (Displays if the Configuration Mode is Advanced) If no packets have been sent in the amount of time
entered, a ping is sent to the remote endpoint.
Ping Restart – (Displays if the Configuration Mode is Advanced) If no pings have been received in the amount of
time entered, OpenVPN restarts the tunnel.
Add/Edit Tunnel – Remote Hosts
Create a list of remote server connections to connect to. OpenVPN will try to connect to each host in the list. If a
disconnect occurs from a given server, the next server will be tried in a round-robin fashion.
Host – IP address of the remote server.
Port – Specify the port if desired.
Protocol – Select UDP or TCP.
Add/Edit Tunnel – Certificate Settings
Generate or upload certificates for OpenVPN.
150