Operation Manual

to a hidden network using WiFi as WAN. It is optional when connecting to a visible network. If it is set in a profile, both
the SSID and BSSID must match to connect to an access point. If the BSSID is not set in a profile, then the router will
connect to any access point that matches the given SSID.
Auth Mode: The type of encryption that is used by the network.
None
WEP Auto
WEP Open
WEP Shared
WPA1 Personal
WPA2 Personal
WPA1 & WPA2 Personal
You have two options for adding network profiles:
Automatic – Select a WiFi network in Site Survey and click Import.
Manual – Click on Add under Saved Profiles and input the required information.
Site Survey
This is a list of WiFi networks that the router can currently find, along with information about the network such as its
mode and channel. Click “Refresh” if a WiFi network you want to connect to is not listed. You can sort the list based on
any of the fields by clicking on the field name.
If you import a network from Site Survey, most of the information about the network will already be completed. You need
to input the password (if there is one) and then click submit to save the WiFi as WAN profile.
Wireless Scan Settings
Scan Interval: How often WiFi as WAN scans the environment for updates. (Default: 60 seconds. Range: 5–3600
seconds.)
Scan While Connected: Continue to scan for WiFi as WAN profile updates when connected. Each time a scan occurs
the wireless communication of the router will be temporarily interrupted. Normally this should be disabled.
164