Operation Manual

Daylight Savings Time – Select this checkbox if your location observes daylight saving time.
Local Management
Enable Internet Bounce Pages – Bounce pages show up in your web browser when the router is not connected to
the Internet. They inform you that you are not connected and try to explain why. If you disable bounce pages then
you will just get the usual browser timeout. In the normal case when the router is connected to the Internet you
don't see them at all.
Disable Attention LED – This disables the Attention LED. This will take effect at the next reboot.
Local Domain – The local domain is used as the suffix for DNS entries of local hosts. This is tied to the hostnames
of DHCP clients as DHCP_HOSTNAME.LOCAL_DOMAIN.
System Identifier – This is a customizable identity that will be used in router reporting and alerting. The default
value is the product name and the last three characters of the MAC address of the router.
Require HTTPS Connection – Check this box if you want to encrypt all router administration communication.
Secure HTTPS Port – Enter the port number you want to use. The default is 443.
Enable SSH Server – When the router's SSH server is enabled you may access the router's command line
interface (CLI) using the standards-based SSH protocol. Use the username "admin" and the standard system
password to log in.
SSH Server Port – Default: 22.
Remote Management
Remote Management allows a user to enable incoming WAN pings or change settings for the router from the Internet
using the router's Internet address.
169