Operation Manual

Allow WAN pings – When enabled the functionality allows an external WAN client to ping the router.
Allow Remote Web Administration – When remote administration is enabled it allows access to these administration
web pages from the Internet. With it disabled, you must be a client on the local network to access the administration
website. For security, remote access is usually done via a non-standard http port. Additionally, encrypted connections
can be required for an added level of security.
Require HTTPS Connection – Requiring a secure (https) connection is recommended.
HTTP Port: Default – 8080. This option is disabled if you select “Require Secure Connection.”
Secure HTTPS Port – Default: 8443.
NOTE: You can restrict remote access to only specified IP addresses in Network Settings → Firewall under Remote
Administration Access Control.
Allow Remote SSH Access – This will enable SSH access to the router from the Internet. It is only available when SSH
access is enabled in the Local Management tab.
Some carriers block the remote SSH access ports. If a ping to the router's WAN port does not work, it is unlikely that
remote SSH access will work.
GPS
If you have an attached device with GPS support, you can enable a graphical view of your router’s location, which
appears in Status → GPS. You can also enable GPS NMEA format sentence reporting (or TAIP for the COR
IBR1100/IBR1150) to a server (LAN, WAN, or remote). This GPS reporting functionality requires a separate
software client to listen/query for these sentences.
SIM-based models with GPS support require that the SIM be inserted. Some carriers disable GPS support in otherwise
supported modems. If you encounter issues with obtaining a fix, contact your carrier and ensure that GPS is supported.
Some of the following GPS options are specific to Cradlepoint COR devices, particularly the COR IBR1100 Series.
170