Operation Manual

Report TAIP PV sentences – Position/Velocity Solution
Reporting Intervals
The device sends GPS sentence reports at either a specified time interval or specified distance interval for:
Default Time Interval (seconds) – Set the interval in seconds between periodic GPS sentence reports. Select the
longest interval practical for your application. A shorter interval uses more router resources and bandwidth;
frequent reports may cause performance and/or availability issues. (Disable by setting this value to 0.)
Stationary Time Interval (seconds) – Set the interval in seconds between periodic GPS sentence reports when
the device is stationary. This overrides the Default Time Interval as long as the unit is stationary. Use this with the
Stationary Distance Threshold to define "stationary." (Disable by setting this value to 0.)
Stationary Distance Threshold (meters) – Set this threshold for use with the Stationary Time Interval. A
device is no longer considered "stationary" when consecutive GPS fixes are above this distance threshold.
Low thresholds increase the possibility of incorrectly detecting movement due to GPS "jitter." (Range: 20–
65535 meters.)
Distance Interval (meters) – Set the interval in meters that the device has to travel to trigger GPS sentence
reporting. Low values increase the possibility of incorrectly detecting movement due to GPS "jitter." (Disable by
setting this value to 0.)
GPS Clients
174