Operation Manual

Sending log information via SMS messages likely results in several resulting texts. Please be aware of the costs of text
messages on the modem’s account, and use this command only if necessary.
*The “port” parameter is optional. It specifies which port – and therefore which modem – to perform the action on. If not
given, the action will happen on the highest priority modem.
Sample Debug Session
The following is an example of a debug session to discover a modem’s APN is misconfigured and needs to be set.
Figure out the state of the modems on the router:
1234,rstatus,
Receive the modem’s status and settings:
1234,mstatus,
Set the modem’s APN to the correct setting:
1234,apn,broadband,
Verify the APN was set properly:
1234,mstatus,
Continue to verify the status periodically to ensure that the modem connects:
1234,rstatus,
LLDP
The Link Layer Discovery Protocol (LLDP) is a standard method for network devices to share information about
themselves among their neighbors. The router stores the information it receives from its neighbors, which can be viewed
on the Status → LLDP page.
Enable LLDP for Ethernet on the WAN and/or LAN.
182