Operation Manual

degrees Celsius. To convert these values to Fahrenheit, multiply by 9, divide by 5, and then add 32 (i.e, F =
9
⁄
5
C + 32).
You can also use an online conversion tool.
The table below gives a few reference points:
°C °F Description
100 212 Boiling point of water
37 98.6 Body temperature
21 70 Approximate room temperature
0 32 Freezing point of water
Minimum Temperature: (Default: 10 °C.) If the device drops to this temperature, an alert will automatically be
generated.
Maximum Temperature: (Default: 70 °C.) If the device reaches this temperature, an alert will automatically be
generated.
To configure minimum and maximum temperature alerts, use one of the following methods:
1. Enable these alerts in Enterprise Cloud Manager.
2. Set up an SMTP email server in System Settings → Device Alerts.
Serial Console
A single Serial device can be used to establish a serial link to a host port on the router. The Serial device can also be
accessed by running "serial" from an SSH session.
Serial Console Configuration
Enabled: Enabling Telnet to Serial will start a Telnet server that passes its connection to the serial adapter.
Enabling this service is not necessary when accessing serial through SSH.
Baud Rate: Bits transmitted per second.
Byte Size: Number of data bits for encoding a character. Value: 5, 6, 7, or 8.
Parity: Enable error detection using parity bit. Values: None, Even, and Odd.
None: No parity checking.
Even: Additional parity bit will be added to make parity sum even.
Odd: Additional parity bit will be added to make parity sum odd.
Stop Bits: Number of bits to indicate a stop period. Value: 1, 1.5, or 2.
Hardware (RTS/CTS): Use hardware flow control.
Software (XON/XOFF): Use software flow control.
185