Operation Manual

Ensure power is switched on:

O = OFF

I = ON

When you set the power switch to the ON ( I ) position, watch for the power LED to illuminate.

5. Connect to a computer or other network equipment.

Connect wirelessly to the WiFi broadcast or with an Ethernet cable connected to your computer and then plugged into

one of the Ethernet LAN ports (numbered 1–12).

The default WiFi network name broadcast is “3100-xxx”, where “xxx” is the last three characters of your router’s MAC

address (this is the SSID on the product label). To connect to the WiFi, you will need to input the DEFAULT

PASSWORD when prompted. The DEFAULT PASSWORD is provided on the product label found on the bottom of your

router.

NOTE: The product label below is an example only: your DEFAULT PASSWORD and SSID will be unique.