Operation Manual

If you are using a SIM-based modem (LTE/GSM/HSPA) with your Cradlepoint router, you may need to configure the

APN before it will properly connect to your carrier. Wireless carriers offer several APNs, so check with your carrier to

confirm the appropriate one to use. Some examples include:

AT&T: "broadband"

T-Mobile: "epc.tmobile.com"

Rogers LTE: "lteinternet.apn"

Bell: "inet.bell.ca"

TELUS: "isp.telus.com"

You can either leave this on the Default setting or select Manual and input a specific APN.

If your specific modem or SIM already has APNs programmed into it, you should leave this on the Default setting. After

finishing this Wizard go to Internet → Connection Manager, select your modem, and edit the settings. The SIM

PIN/APN tab has more available settings than are provided here.

Modem Authentication

Some modems require a username and password to be entered to authenticate with a carrier. Do not fill in these fields

unless you are sure your modem needs authentication.

Authentication Protocol – Set this only if your service provider requires a specific protocol and the Auto option

chooses the wrong one. Select from:

Auto

Pap

Chap

Username

Password