Operation Manual

Please record these settings for future access. You may need this information to configure other wireless devices.

NOTE: If you are currently using the device's WiFi network, reconnect to the network using the new wireless network

name and security password.

Click APPLY to save the settings and update them to your router.

IP Passthrough Setup

You can quickly enable IP passthrough with the IP Passthrough Setup Wizard available under Getting Started → IP

Passthrough Setup. IP passthrough takes a 3G/4G WAN data source (USB, ExpressCard, or Cradlepoint business-

grade modem) and passes the IP address through to Ethernet LAN.

Using this function requires many changes to your router configuration. The IP Passthrough Setup Wizard will

automatically make these changes for you: simply read through the wizard and select Enable IP Passthrough on the

second page. For further configuration options, see Network Settings → WiFi / Local Networks.

Review the list of changes to ensure they are compatible with your router needs:

All Ethernet ports will be set to LAN (i.e. you cannot use Ethernet as an Internet source for your router).

All WAN devices will have Load Balance disabled and the highest priority device will be used.

All network groups except the primary network group will be removed.

All wireless interfaces will be removed from the primary network group. (It is possible to have a wireless interface

associated with another network.)