Operation Manual

All router-based VPN and GRE services will be disabled.

The Routing Mode will be set to IP Passthrough. (Network Settings → WiFi / Local Networks in the “Local

Network Editor” under “IP Settings”)

The Subnet Selection Mode will be set to "Automatically Create Subnet" (Network Settings → WiFi / Local

Networks in the “Local Network Editor” under “IP Settings” – this shows once IP Passthrough is set as the Routing

Mode). You have the option to override this and select Force 24 Subnet, which forces a subnet of 255.255.255.0

and uses the first available address in the network as the gateway. This is for compatibility with equipment that may

not handle modem addressing schemes; this should not be used unless necessary.

Any Ethernet WAN connections should be disconnected before IP passthrough is enabled.