Operation Manual

Access – Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP

To configure a network, see: Network Settings → WiFi / Local Networks.

WiFi Networks

“Detailed Info” links to Network Settings → WiFi / Local Networks.

For each enabled WiFi radio (2.4 GHz and 5 GHz if available), the following information is displayed:

WiFi Radio: Channel – 1-11 for 2.4 GHz; 36, 40, 44, 48, 149, 153, 157, 161, or 165 for 5 GHz; Transmit Power

(expressed as a percentage)

Channel Contention – Displayed as a bar graph by percentage (lower numbers are better; lower numbers mean that

there are fewer competing signals)

For each WiFi network, the following information is displayed:

SSID – Service Set Identifier: an identifier or name for a wireless network

Security – WPA2/WPA1/WEP Personal/Enterprise or Open; Isolated Clients

Network – Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP

To configure WiFi network settings, see: Network Settings → WiFi / Local Networks.

Router Alerts

On the right side of the Dashboard page is a brief set of “Router Alerts” that state basic information such as whether the

router is running properly. For example, this will inform you about the availability of new firmware.

Router Alerts includes links to System Settings → System Software (for new firmware) and Internet → Connection

Manager.

Firewall

Provides current status of your configured firewall.