Operation Manual

produce the desired behavior.
NOTE: Websites that use HTTPS will not be blocked by these rules. You will need to use OpenDNS to block HTTPS
websites.
Click Add or Edit to open the Filter Rule Editor.
Assigned Network: Select either “All Networks” or one of your LAN networks from the dropdown list.
Domain/URL/IP: Enter the Domain Name or URL (address) of the website you wish to control access for, e.g.
www.google.com. To make sure the full domain is blocked, enter the most inclusive domain (e.g. google.com will
effectively block www.google.com as well as maps.google.com and images.google.com). Alternatively you can use
an IP address, e.g. 8.8.8.8, or address range written in CIDR notation, e.g. 8.8.8.0/24.
Filter Action: Select Block or Allow.
Rule Priority: Higher number rules overrule lower number rules.
Enabled: A rule can be enabled or disabled by selecting or deselecting the checkbox.
Click Submit to save your rule changes.
Default Network Filter Settings
Use Default Network Filter Settings together with Network WebFilter Rules to control website access. All of your
networks are set to allow website access by default. Select a network and click Edit to change the default filter settings.
53