Operation Manual

Data Loss Prevention

Bandwidth Management

Web Access Control

And more…

NOTE: Zscaler requires a feature license. Go to System Settings → Feature Licenses to enable this feature.

Enter your Zscaler account information to enable these settings. Input local network information (Network Address and

Netmask) to assign your Zscaler implementation to one or more local network(s).

DHCP Server

DHCP stands for Dynamic Host Configuration Protocol. The built-in DHCP server automatically assigns IP addresses to

the computers and other devices on each local area network (LAN). In this section you can view a list of assigned IP

addresses and reserve IP addresses for particular devices.

Active Leases: A list of devices that have been provided DHCP leases. The DHCP server automatically assigns these

leases. This list will not include any devices that have static IP addresses on the network. Select a device and click

Reserve to add the device and its IP address to the list of Reservations.