Operation Manual

priority queues first. Move the slider to select from the following options (Default: Normal):
Lowest
Lower
Below Normal
Normal
Above Normal
High
Higher
Highest
DSCP (DiffServ) Tag: Differentiated Services Code Point (DSCP) is the successor to TOS (Type of Service). Use this
field to 'tag' the traffic by putting the value in the DSCP header of each IP packet that flows through this queue. Use the
value of '0' to clear the existing DSCP value in the packet header.
DSCP Tagging is sometimes used so that other networking equipment, upstream or post-NAT, can do traffic shaping
based on the DSCP Tags as opposed to IP addresses or ports.
This setting is optional. For more information see the Differentiated services Wikipedia page.
Click Finish to save this queue.
Rules
A traffic shaping rule identifies a specific message flow and assigns that flow to one of the queues created above.
Click Add to create a new Traffic Shaping rule.
Traffic Shaping / QoS Rule Editor
The first page of the Traffic Shaping / QoS Rule Editor allows you enable/disable the rule, name the rule, specify a
protocol for the rule, and select a queue to associate the rule with.
70