Operation Manual

Rule Enabled: (Default: Enabled.) Deselect this to disable this rule. This can be useful for quickly changing
configurations. If both upload QoS and download QoS are disabled then the rule will disable automatically.
Rule Name: Create a name for the rule that is meaningful to you.
Protocol: The protocol used by the messages: TCP/UDP, TCP, UDP, or ICMP. Select “Any” if your rule does not control
a specific type of message that uses a specific protocol.
Queue Name: Select a queue to associate this rule with.
Click Next to continue to the next page.
Use ports and/or IP addresses to define the type(s) of traffic attached to this rule. Leaving any field blank will match all
values; all fields are optional.
Source Port(s) and/or Destination Port(s): Enter a port number between 1 and 65535. To enter a single port number,
71