Operation Manual

Ignored MAC Addresses: This is the list of MAC addresses that will not produce an alert or a log entry when they are
connected to the router. These should be MAC addresses that you expect to be connected to the router. To add MAC
addresses to this list, simply select devices shown in the MAC Address Log and click “Ignore.” You can also add
addresses manually.
MAC Address Log: This shows the last 64 MAC addresses that have connected to the router, as well as which interface
was used to connect. The time/date that is logged is the time of the first connection. The page may need to be refreshed
to show the most recent log entries.
Double-clicking on entries from this list will add them to the Ignored MAC Addresses list.
Routing
Add a new static route to the IP routing table or edit/remove an existing route.
Static routes are used in networks with more than one layer, such as when there is a network within a network so that
packet destinations are hidden behind an additional router. Adding a static route is a way of telling the router about an
additional step that packets will need to take to reach their destination.
Click Add to create a new static route.
80