User manual

CRADLEPOINT CBA750 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 20
4.5 WAN Configuration
Use the WAN Configuration sub-menu to configure the network
settings for the Wired and Cellular Modem WAN.
4.5.1 Cellular Modem PPP Authentication (optional).
Enter your Cellular Service Provider information in these three fields
only if directed by your Cellular Service Provider.
Modem Interface. Modem interface is the physical port the modem
is connected to. Select the appropriate port to change its settings.
Username. If required by your ISP, enter the username provided to
you by your ISP. If not required by your ISP, leave this field blank.
Password. If required by your ISP, enter the password provided to
you by your ISP. If not required by your ISP, leave this field blank.
Verify Password. Re-enter the password.
4.5.2 DNS Settings
Use the WAN Configuration sub-menu to configure the network
settings for the Wired and Cellular Modem WAN (the first connected
cellular handset or modem).
DNS Address. Select the Get Automatically from ISP/Cellular
Provider radio button to acquire a DNS Address automatically from
our ISP/Cellular Provider or select the Use the Following DNS
Servers radio button to specify DNS Servers. NOTE: You would
specify DNS Servers if you want Wi-Fi clients to access DNS servers
that you use for customized addressing or if you have a local DNS
server on your network.
Primary DNS Server. If you choose to use specify your DNS
Servers, then enter the IP address of the server you want as your
Primary DNS Server in this field.
Secondary DNS Server. If you choose to use specify your DNS
Servers, then enter the IP address of the server you want as your
Secondary DNS Server in this field.