User manual

CRADLEPOINT CBA750 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 7
3 QUICK START
3.1 Setting Up Your Adapter
 Connect Mobile Broadband Device – Plug a USB or ExpressCard data modem
into the appropriate slot. The data modem should have an active data plan.
 Place CBA750 Adapter in Best Signal Location – Use Modem Signal Strength
display to find the best location for the CBA750 Adapter. Use provided
mounting hardware if desired.
 Connect to a Router or Switch – Plug the Ethernet cable into a routing device
or switch.
 Connect Power Supply – Connect the included power adapter if not using
Power-over-Ethernet (PoE).
For most users, the CBA750 Adapter can be used without configuration. When
needed, set the Configuration switch to “O” to place the unit into configuration mode.
Configuration mode is used to set up user parameters, download new firmware, and enable cellular modem diagnostics by accessing the
administration page at http://192.168.0.1
3.2 Firmware Features