Instructions / Assembly

ManualsBrandsCRAFT + MAIN ManualsAlcove Shower DoorsCove 42 in. x 69 in. Semi-Frameless Pivot Shower Door and Fixed Panel in Brushed Nickel with C-Handle and Knob

1

2

3

4

5

6

7

8

9

INSTALLATION PROCEDURE / STEP 1 / STEP 2 / STEP 3

1

Set the level on the walls to ensure

that they are plum. Then set the

wall jambs (14) in place and

mark the hole locations.

- 3 -

5

8

1 1/2” PAN HEAD SCREW

2

Next drill holes in the wall and

using a rubber mallet, insert

the wall plugs (1).

2.1

FOR ACRYLIC & FIBERGLASS

SHOWER ENCLOSURES

Using a 1/8 inch drill bit,

drill a hole about 1-1/2 inch

deep at each of the

previously marked locations.

2.2

FOR TILED SHOWER

ENCLOSURES

Using a 1/4 inch masonry

drill bit, drill a hole about

1-1/2 inch deep at each of

the previously marked

locations.

Insert wall plug (1) into each

of the drilled holes.

WARNING: Do not use wall

anchors with ﬁberglass or

acrylic shower enclosures.

3

Set wall jambs (14) in place and

screw (2) into the walls.

STEP 1

STEP 2

STEP 3