Manualshelf

Installation Guide

ManualsBrandsCRAFT + MAIN ManualsBathLagoon Dbl Roller 60 in Lx 30 in W x 78 in H Left Drain Alcove Shower Stall Kit in Driftwood and Brushed Nickel Hardware
12345678910
INSTALLATION PROCEDURE / STEP 3
- 6 -
3
APPLYING ADHESIVE AND TAPE TO BACK SIDE OF WALL PANELS
The following instructions should be used when applying tape and adhesive to each wall panel.
1. Apply double-sided construction tape to the back of the wall panel as shown.
2. Apply construction grade adhesive to the spaces between the tape as shown in a circular pattern.
The beads of adhesive should be 2" apart and up to, but no closer than 1" from the panel edge.
Important: The circular pattern is critical for proper adhesion.
2” Space
Between Construction
Adhesive Application
1” Space
Between Panel Edge &
Adhesive Application