User manual

9
ASSEMBLY
To assemble your CX202, read and
understand the text and figures given.
Attach the upper smaller brackets to the top
holes of each two legs using screws and
washers provided, as shown in figure-5. Do
not tighten the screws at this time.
Figure-5 Attaching upper smaller brackets
to the legs
Attach the lower small brackets to the
bottom holes of the legs using screws and
washers provided. See figure-6. Finger
tighten the screws.
Figure-6 Attaching the lower small bracket
Now, attach the legs together with the
longer side brackets as shown in figure-7.
Make sure the “U” shaped bracket is
attached to right hand side of the front
bracket having the CX202 model# on it as
shown in figure-7 and tighten all the screws.
Figure-7 Stand assembled
Once the stand is assembled, put the stand
upside down on the floor and attach each
foot to the each leg as using washer and
nuts provided. See figure-8.
Figure-8 installing the feet on the legs
Adjust the nuts shown in figure-6 at the
same level. This will help to level the
machine later.