Operator's Manual ® Rear Engine Riding Mower with Electric Start Model No. 107.280340 (12.5HP Briggs & Stratton Engine with 28" Mower Deck) For answers to your questions product, call: about this 1-800-659-5917 Sears Craftsman Help Line 5 am - 5 pm, Mon- Sat Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit our Craftsman website: www.sears.com/craftsman U.S.A.
ThankYou for purchasing this quality-built Craftsman product. We're pleased that you placed your confidence in our brand. When operated and maintained according to the instructions in this manual, your Craftsman product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them.
Identification Numbers Warranty Statement Emissions Statement Operator Features Safety and Controls 3 4 5 10 Maintenance Storage Troubleshooting Specifications Service Parts 17 21 22 24 PTS-1 11 Operation CRAFTSMAN 2 FULL WARRANTY When operated and maintained according to all supplied instructions, if any non-expendable part of this riding equipment fails due to a defect in material or workmanship within two years from the date or purchase, call 1-800-659-5917 to arrange for free in-home repair.
Emissions ControlSystemWarrantyStatement California,United States and Canada Emissions Control Defects Warranty Statement TheCaliforniaAir ResourceBoard(CARB),U.S.EPAadnB&Sare pleasedto explainthe EmissionsControlSystemWarrantyonyour smalloff-roadengine(SORE).In Californai,newsmalloff-roadenginesmodelyear2006andlatermust bedesigned,built and equippedto meetthe State'sstrigentanti-smogstandards.
important Safety instructions --'] WARNING The engine exhaust from this product contains chemicals known to the State of California to SAVE THESE iNSTRUCTiONS - This manual contains important instructions that should be followed during the initial set-up, the operation, and the maintenance of the equipment. Safety Symbols cause cancer, birth defects, or other reproductive harm.
WARNING: This cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or bystanders. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine.
1 1. Know how to STOP blades and engine quickly in preparation for emergencies. 12. Use extra care when loading or unloading the machine into a trailer or truck. General Operating Safety 1. Mount and dismount machine from left side. Keep clear of discharge opening at all times. 2. Start engine from operator's seat. Make sure blades are OFF and parking brake is set. 3. DO NOT leave machine with engine running.
Towing 1. Tow only with a machine that has a hitch designed for towing. DO NOT attach towed equipment except at the hitch point. 2. Follow the manufacturer's recommendation for weight limits for towed equipment and towing on slopes. 3. DO NOT allow children or others on towed equipment. 4. On slopes, the weight of the towed equipment may cause loss of traction and loss of control. 5. Travel slowly and allow extra distance to stop. 6. Exercise CAUTION when pulling loads.
SUGGESTED GUIDE FOR SiGHTiNG SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN NOT ACROSS HILL 10 DEGREES HILL, MAX. WARNING: To avoid serious injury, operate your unit up and down the face of slopes, never across the face. Do not operate on slopes greater than 10 degrees. Make turns gradually to prevent tipping or loss of control. Exercise extreme caution when changing direction on slopes. Braking may be affected by attachments. Reduce speed on slopes. 1.
NOTICE: The figures and illustrations in this manual are provided for reference only and may differ from your specific model. A. B. C. D. E. Steering Wheel Engine Speed Control (hidden from view) Ignition Switch Clutch/Brake Pedal Parking Brake Latch E G. H J. K. L.
Oil Recommendations Fuel Recommendations We recommend the use of Briggs & Stratton Warranty Certified oils for best performance. Other high-quality detergent oils are acceptable if classified for service SF, SG, SH, SJ or higher. Do not use special additives. Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart to select the best viscosity for the outdoor temperature range expected.
How to Add Fuel _=_ WARNING Gasoline and its vapors are extremely _ flammable Fire or explosion and explosive. can cause severe burns or death. Before Starting 1. Check the tire pressure; add or release air as needed to bring pressure to values listed on Specifications page. 2. Check guards, deflectors and covers to make sure all are in place and securely tightened. 3. Check engine oil and add oil as needed to bring level up to the FULL mark (A, Figure 2).
Starting Engine WARNING Gasoline and its vapors are extremely _ flammable and explosive. Fire or explosion can cause severe burns or death. N When Starting Engine • Ensure that spark plug, muffler, fuel cap and air cleaner FIGURE 4 (if equipped) are in place and secured. • Do not crank the engine with the spark plug removed. NOTE: A warm engine may not require choking. In this case, set the choke control to OPEN.
How to Set the Cutting / 1. Adjust the cutting height by raising or lowering the deck lift lever (A, Figure 8) into the desired height of cut notch (B). 2. When mowing is completed, set the deck lift lever to the highest position, then stop the blade. 1 FIGURE _ Height 6 ® WARNING DO NOT leave the machine with the I engine running. STOP blade. STOP engine. Shift to l neutral and engage parking brake. Remove key. FIGURE 8 7. To stop the engine, turn the key.
Reverse Lockout Mechanism This riding mower has a Reverse Lockout Mechanism. This device prevents the mower from being shifted into reverse while the blade is turning. 1. To shift into reverse, stop the blade by releasing the blade pedal. 2. Fully depress the clutch/brake pedal, then shift into Reverse. 3. After visually clearing the area behind the machine, smoothly release the clutch/brake pedal. FIGURE 9 [_WARNING DO NOT operate blades in reverse. STOP BLADES.
Reverse Lockout Override F_ WARNING AMPUTATION HAZARD F_ ailure to obey severe these rules couldinjury resultorindeath loss of control of unit, personal How to Set the Parking . Brake To set the parking brake, press the clutch/brake pedal (B, Figure 11) all the way down, slide the parking brake latch (A) all the way in, and release the clutch/ brake pedal. A detent in the parking brake latch will keep the parking brake engaged. to you, or bystanders, or damage to property or equipment.
Emissions Control Equipment Maintenance, replacement, or repair of the emissions control devices and systems may be performed by any non-road engine repair establishment or individual. However, to obtain "no charge" emissions control service, the work must be performed by a Craftsman Service or Briggs & Stratton dealer. See the Emissions Warranty.
Check Safety Interlock System Check This unit is equipped with safety interlock switches. Do not attempt to bypass safety switches, and never tamper with safety devices. Reverse Lockout Mechanism -] WARNING If Reverse Lockout Mechanism is not functioning properly, DO NOT operate machine until proper adjustment has been performed by an Operational SAFETY Checks authorized service dealer.
Check Tire Pressure Clean Battery and Cables Tire pressure should be checked (Figure 13) periodically, and maintained at the pressures listed on the Specifications page. The pressures shown provide proper traction, improve cut quality, and extend tire life. Note:These pressures may differ slightly from the "Max Inflation" stamped on the side-wall of the tires.
Check Tractor Brakes How to Service Check the machine brake for proper function. Engage the park brake, and push the machine. The rear tires should skid. Drive the machine forward and apply the brake. The machine should come to a complete stop in less than 5 ft. _ the Air Filter ARNING Gasoline and its vapors are extremely flammable and explosive. _oFire or explosion can cause severe burns or death [L=T=J Never start or run the engine with the air cleaner assembly or the air filter removed.
Before Storage Before storing the unit perform the following steps: 1. Turn the mower blade OFF, move the transmission shift lever to Neutral (N), set the parking brake, and remove the key from the ignition switch. 2. Check all fluid levels. Check all maintenance items. 3. Remove battery and store in a cool place. Recharge about once a month. If the battery is left in the unit, disconnect the negative cable. Protect Fuel System Fuel can become stale when stored over 30 days.
Troubleshooting the Tractor PROBLEM LOOK FOR i Brake pedal not depressed. i PTO (electric clutch) switch is in ON position. Cruise control engaged. Engine will not turnover or start, Engine knocks. Excessive oil consumption. Engine exhaust black. Engine runs, but tractor will not drive, Move knob to NEUTRAL/OFF position. i Engine flooded. Disengage the choke. Fuse is blown. See authorized dealer. i Battery terminals require i cleaning. See Cleaning the Battery and Cables section.
Troubleshooting the Tractor PROBLEM LOOK FOR Brake will not hold. internal brake worn. i Steering linkage is loose. Tractor steers hard or handles poorly. Troubleshooting improper tire inflation. Front wheel spindle i bearings dry. REMEDY See authorized dealer. See authorized dealer. See Check Tire Pressure section. See authorized dealer. the Mower PROBLEM LOOK FOR REMEDY Lift linkage not properly attached or damaged. See authorized dealer. Mower not leveled See authorized dealer.
Model # 107.280340 Overall Length 64" Overall Width 32" Deck Size 28" (inches) Height of Cut (5-position) 1.5 - 4.0" Transmission Type 5-Spd Disc Drive Tire Pressure Front 11×4.00=4 Rear 16×6.5=8 12 psi 12 psi Turning Radius 28" Engine Power (hp) Engine Displacement 12.5 (cc) 344 cc Engine Oil Capacity 42 - 44 oz. Fuel Tank Capacity 7 qts. Spark Plug Gap .030" Weight 314 Ibs.
RepairParts PTS - 1
Front End & Steering Group CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Front End & Steering REF NO PART NO. CRAFTSMAN Group QTY. DESCRIPTION 1 7501813YP 1 ASSEMBLY, 2 7103982YP 1 PLATE, Center, Steering Wheel 3 7013862YP 1 ROLL PIN, 1/4 x 1-1/2" 4 7023667YP 1 FOAM COVER, Steering Shaft 5 7023671YP 1 COVER, Steering Shaft 6 7090296YP 1 PIN, 3/16 x 1" Cotter 7 7090183YP 2 WASHER, .66 x 1.31 x .09 Fiat 8 9 7046158YP 7101192YP 1 1 BUSHING, Nylon 10 7022449YP 1 11 7090372SM 1 CABLE, Clutch/Brake (54.
Engine, Muffler & Drive Disc Group CRAFTSMAN NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5 ! 4 \ 3 2 BRIGGS & STRATTON ENGINE 7 / 8 9 PTS - 4 28" 107.
Engine, REF NO CRAFTSMAN Muffler & Drive Disc Group PART NO. QTY. DESCRIPTION 1 219977-0130-B1 1 * ENGINE, 12.5HP Briggs Intek OHV, E. S. No Recoil electric start 2 7027972SM 1 ASSEMBLY, 3 7015352SM 1 GASKET, Exhaust 4 7090362YP 2 SCREW, 1/4-20 x 5/8" Hex Washer Head Self-Tap 5 7074453YP 1 MUFFLER, w/Heat Shield (Briggs 11 thru 17.
Gear Shift Assembly CRAFTSMAN NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2 / 3 8 (_ ASSEMBLY 10 \ 11 5 16 PTS - 6 28" 107.
CRAFTSMAN Gear Shift Assembly REF NO PART NO. QTY. DESCRIPTION 1 7023656YP 1 GRIP, Shift Handle 2 7059212YP 1 WELDMENT, 3 7023914YP 1 PIN, 1/4 x 1-3/4" Tapered Clevis 4 7090037YP 1 PIN, 3/32 x 3/4" Cotter 5 7031036YP 2 WASHER, Thrust 6 7019245YP 1 BUSHING, 3/4 x 1.
Electrical Components - For 12.5 HP Briggs CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8 23 TO ITEM 8 9 \ TO ITEM 16 k 24 K 21 G. MAGNETO BLOCK SHORTING (See Inset) I GROUND -_--,,_---4 ..,_j_., _ _ *'_ 1 ,_ H I. ALTERNATOR CHARGING WIRE J.
Electrical REF NO Components PART NO. - For 12.5 HP Briggs QTY.
Electrical Systems - Magneto Shorting Block CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Electrical REF NO .... Systems PART NO. - Magneto QTY. Shorting Block CRAFTSMAN 28" 107.
Electrical Schematic - 12.5 HP Briggs CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8= °E _= I= i Y o >- h IIJI Z ILl LU n," L_ w' LU WIRING SCHEMATIC FOR 12.
Electrical REF NO Schematic PART NO, ..... CRAFTSMAN - 12.5 HP Briggs QTY, DESCRIPTION Electrical Schematic Footnotes PTS - 13 28" 107.
Fuel Tank & Seat Group CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
CRAFTSMAN Fuel Tank & Seat Group REF NO PART NO. QTY. DESCRIPTION 1 885172YP 1 SEAT, V2405 w/Switch Hole, No Graphics 2 7052435YP 1 ASSEMBLY, 3 7019377YP 1 CAP, with Gauge 4 7029900SM 2 CLAMP, Fuel Line 5 791766 1 HOSE, Fuel (1/4" I.D. x 8-1/2" long) (Cut to Length 8 1/2" long) 6 791766 1 HOSE, Fuel (1/4" I.D.
28" Hi-Vac Cutting Deck & Deflector CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. _.....I 4 2 3 , ....-._ -----*.., .......-.. ' --"_""Z, " q','_ .,..,,,_.,.. • ;._) %.
28" Hi-Vac REF NO CRAFTSMAN Cutting Deck & Deflector PART NO. QTY. 28" 107.
Belt, Blade Brake & Interlock CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Bel_ Blade Brake & Interlock REF NO PART NO. QTY. CRAFTSMAN DESCRIPTION 1 7074467SM 1 NUT, 3/4-16 Hex Jam, GR 8 2 7032027SM 2 WASHER, 49/64" I.D. x 1-1/2" O.D. Fiat 3 7018781YP 1 PULLEY, Deck 4 7022252YP 1 * BELT, Drive (72.
Yoke Lift Components CRAFTSMAN NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 7 8 20 18 19 18_ 17 / 16 / 17 /_ "_ 21 20 ASSEMBLED VIEW PTS - 20 28" 107.
CRAFTSMAN Yoke Lift Components REF NO PART NO. QTY.
Rails, Lift Arms & Cam Lift Group CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Rails, Lift Arms & Cam Lift Group REF NO PART NO. QTY. CRAFTSMAN 28" 107.
Wheels - Front & Rear CRAFTSMAN NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 4 / 8 5 / \ 9 12 FRONT 14 / REAR PTS - 24 28" 107.
Wheels - Front & Rear REF NO PART NO. CRAFTSMAN QTY. 28" 107.280340 DESCRIPTION 1 7058943YP 2 ASSEMBLY, 2 7073563YP 1 TIRE, 11 x 4.00-4 (Kenda) 3 7017146YP 1 RIM (For 4.10/3.50 x 4 Tire) 4 7011807YP 2 BALL BEARING, Flange (3/4" I.D.) 5 7012234SM 1 VALVE STEM, Snap In 6 7014669YP 1 LUBE Fitting 7 7031038YP 1 8 9 7011032YP 7010935SM 1 3 CAP, Dust FELT SEAL 10 7103979YP 1 WASHER, .77 x 1.13 x .
Decals CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. I i I ART NOT AVAILABLE I J / \ 5 1 4 / 8/ Avoid _ serious injury *Read the operators or death manual before using machin_ "Ke_p safety devi3e_, (gLlar&_. $_leld& switches, etc.} in pl_c_ and wodd_g. _'_ _al) 8 \ • DLsi_ngage 8_1d_v_, shut _f engine a_d remove,k,W bab_ _avlng operating zer_e. ,Remove ebjec'_ that couid be _rc,_n the _4ade.
Decals REF NO CRAFTSMAN PART NO. QTY.
Main Case & L.H. Fender Group CRAFTSMAN NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 4 3 I e, 17 1 2 16 18 6 i \ 8 I 24 25 30 12 34 13 \ 33 26 PTS - 28 28" 107.
Main Case & L.H. Fender REF NO PART NO. Group QTY.
Left Hand Fender & Bearing CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Ref: Primary Chain Case & Smooth Clutch Assembly 12 / 3 lO 0 0 0J_ .-./ 6 11 Not available separately, order Ref.
Left Hand Fender & Bearing REF NO PART NO. QTY. CRAFTSMAN DESCRIPTION 1 7012332YP 2 BOOT CLAMP, 2" 2 7075115YP 1 BOOT, Rear Axle, Thick Flange 3 7011072YP 1 4 7011071YP 1 WASHER, Thrust THRUST WASHER 5 7052827YP 1 ASSEMBLY, 6 7074182YP 2 BEARING, DX 7 7074500YP 1 SEAL, Axle (Dust/Grease) 8 9 7075848YP 7011070YP 1 1 TIE ROD (5/16-24 thread- both ends) 10 7037285YP 1 FENDER, Left Hand (1.628" I. D.
Primary Chain Case & Smooth Clutch CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Primary Chain REF NO PART Case NO. & Smooth QTY. CRAFTSMAN Clutch 28" 107.280340 DESCRIPTION 1 7052683YP 1 ASSEMBLY, 2 7041136YP 1 WELDMENT, 3 7028761YP 1 GASKET, Primary Chain Case 4 7011121SM 2 WASHER, 5/8" BelIevilIe 5 7010756YP 2 BEARING, .625 x 1.37 x .
Differential & R. H. Fender Group CRAFTSMAN NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 35 32 / 36 '_ :" ? 1 16 17 PTS - 34 ASSEMBLY 28" 107.
Differential REF NO & R. H. Fender PART CRAFTSMAN Group 28" 107.280340 NO. DESCRIPTION QTY. 1 7090362YP 13 SCREW, 1/4-20 x 5/8" Hex Washer Head Self-Tap 2 7012296YP 1 BEARING, Axle (R. H. Fender) 2 7054372YP 1 BEARING-DX, Axle (R. H. Fender) includes 1-1/8" I.D. (DX) bearing 3 7010969YP 1 NUT, 5/16-24 Flange Lock (Large) 4 7031079YP 1 WASHER, Thrust 5 7038067YP 1 PLATE, Differential Note: 4 holes offset - align properly to prevent binding.
Blade Stop Pedals CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
CRAFTSMAN Blade Stop Pedals REF NO PART NO. QTY. DESCRIPTION 1 7073267YP 1 FOOT PEDAL, Blade Stop Control 2 7074649YP 1 SPRING, Latching (.072 dia.) 3 7015448YP 1 SPRING, Pedal 4 7015495YP 1 SHOULDER BOLT, 3/8-24 w/Nylon Patch, GR 5 5 7015446YP 1 SHOULDER BOLT, 3/8-24 x 9/16" 6 7032030SM 1 WASHER, Fiat 13/32" ID x 1.
Spindle Assembly CRAFTSMAN NOTE: Unless noted otherwise, use the standard hardware torque specification chart. G ASSEMBLY ' 50 t A _tp 11 PTS - 38 28" 107.
Spindle Assembly REF NO PART NO. CRAFTSMAN QTY. DESCRIPTION 1 7058049YP 1 ASSEMBLY, 2 7012491SM 2 RING, 1.85" Internal Retaining 3 7013313SM 2 BEARING, Spindle 4 7050696YP 1 ASSEMBLY, 5 7010817SM 1 LUBE FITTING, 3/16" Press-In 6 7044785YP 1 SPINDLE, Rider (10.327" overall length) 7 7010935SM 1 WASHER, .77 x 1.13 x .
Accessories CRAFTSMAN 28" 107.280340 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GRASS CATCHER KIT 10 1 \ 17 41 26 / 18 23 39 \ 24 Z5 21 Ref: Main Case & L.H, Fender Group 22 28" NINJA RECYCLING KIT 32 Ref: SPINDLE , \ ASSEMBLY _A 33.__.
A ccessories REF NO PART CRAFTSMAN NO. QTY. 28" 107.280340 DESCRIPTION 7600101YP 1 KIT, Single Bag Grass Catcher, 28" (Includes Ref. Nos.
219977-0130-B1 I ,_sSnORT BLOCK I I 1055OPERATOR'S MANUAL I 1329 REPLACEMENT ENGINE I I 1330 REPAIR MANUAL I 85O 691 22_ ' _,,_ , '_ , ...... il, \_ 1 [ - i 15 8471 1027 161 842 24 _ _ 750 _ 146 758_ 1270 524 O 759 MSCO00200- 2 Assembfies include all parts shown in frames.
219977-0130-B1 d 635 3374_' /_h _;_ 238 ® 1022 85O 1034 _ 1O29 D 1022 501 415A @ 654% 45_ 914_ 2 1026 186_ 54% 358 ENGINE GASKET SET "- 1022 12____ 1095 VALVE GASKET SET 943 ,<_ 51 1022 868_) 524 O 51A 617 i_ 868 _P MSC000200-3 200 Assembfies include 51A all parts shown in frames.
219977-0130-B1 108 13o© 1 95 ¢ (!_>_ 987 51 104 6o_ [\J 240 1127 121 CARBURETOR 51% 104 OVERHAUL Cp 127 0 987 (_ 105 617 0 633 ® 217_ MSC000200-4 KIT Assembfies include 1266A C_ all parts shown in frames.
219977-0130-B1 I 1036 EMISSIONS LABEL I 643" 967 445 1266A C,> 305 305A 1266 f_ _'_ '_' _- 188 616 404 0 2271 222 614 !_ 505 209 562 J_ 507 520_' # 359 373_ MSCO00200- 5 Assembfies include all parts shown in frames.
219977-0130-B1 729 697 415 801 1051 CoD 544 1070 @ 783 _ 310 513 8O3 \ • 1044 579 % I 802 356 521 ¢/" 78 37 ," _ >_ 334 _I _._\ 635 MSCO00200- 6 Assembfies include all parts shown in frames.
219977-0130-B1 REF. NO. PART NO. 1 697377 399265 3 391086s 4 5 7 697188 796183 273280s 11 12 13 794683 697110 690360 15 16 20 690946 697390 795387 22 692125 23 24 25 698281 222698s 792307 26 792306 27 28 29 32 698469 697099 791633 791118 33 34 35 791934 791935 691279 36 691279 37 40 42 43 45 46 697352 690964 499586 691968 690564 793880 REF. NO.
219977-0130-B1 REF. NO. PART NO. 552 697144 562 691119 579 584 691029 794682 585 697109 601 791850 614 691620 616 617 692012 692138 633 699813 634 698779 635 643 654 691909 697155 690958 684 697157 691 697 692407 690372 718 729 690959 691224 741 750 757 758 759 783 697128 790832 793242 697391 697392 693713 REF. NO.
Hardware identification& TorqueSpecifications Common Hardware Types Torque Specification Chart Hex Head Capscrew FOR STANDARD MACHINE HARDWARE (Tolerance + 20%) Washer Lockwasher Carriage O Hex Nut Size Of Hardware When bolt or capscrew is identified as 1/2 - 16 x 2", this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long).
PTS - 50
anual operaclor ® Tractor cortac_speci con motor trasero con arranque el_ctrico Modelo N° 107.280340 (Motor Briggs & Stratton cortac_sped de 71 cm [28 pulg.]) de 12,5 HP con plataforma del Para obtener respuestas a sus preguntas sobre este producto, Ilame al: 1-800-659=5917 Linea de ayuda de Sears Craftsman Lunes a sabado de 5 a.m. a 5 p.m. Sears, Roebuck and Co., Hoffman Estates, IL 60179 EE.UU. Visite nuestro sitio Web de Craftsman: www.sears.
Gracias por comprar este producto fabricado con la calidad Craftsman. Nos complace que haya depositado su confianza en nuestra marca. Cuando se opera y se mantiene segOn las instrucciones de este manual, su producto Craftsman le puede brindar muchos ahos de servicio confiable. Este manual contiene informaci6n de segufidad para que tome conciencia de los peligros y riesgos asociados a esta mAquina y c6mo evitarlos.
2 Mantenimiento de garantia de emisiones 3 4 Almacenaje Localizaci6n Seguridad del operario Caracteristicas y mandos Funcionamiento 5 10 11 Numeros de identificaci6n Declaraci6n Declaraci6n GARANT|A 17 21 22 de fallas Especificaciones Repuestos tecnicas 24 PTS- 1 COMPLETA DE FABRICACION Cuando se opera y mantiene de acuerdo con todas las instrucciones que se proporcionan, si alguna pieza no ampliable de este equipo falla debido a un defecto en los materiales o en la fabricacidn dentro de do
EmissionsControl System Warranty Statement California, Statement United States and Canada Emissions Control Defects Warranty TheCaliforniaAir ResourceBoard(CARB),U.S.EPAadnB&Sare pleasedto explainthe EmissionsControlSystemWarrantyonyour smalloff-roadengine(SORE).In Californai,newsmalloff-roadenginesmodelyear2006andlatermust bedesigned,built and equippedto meetthe State'sstrigentanti-smogstandards.
Instrucciones importantes de seguridad _--_ADVERTENCIA GUARDE ESTAS INSTRUCCIONES - Este de seguridad escape del motor de este producto contiene sustancias manual contiene instrucciones importantes que se deben seguir durante el ajuste inicial, la operaci6n y el mantenimiento del equipo. Simbolos El qu[micas que el estado de California sabe que causan cancer, defectos congenitos u otros dafios reproductivos.
ADVERTENClA: iEsta m&quina cortacesped es capaz de amputar manos y pies y puede lanzar objetos que pueden causar lesiones y daSos! Si no se cumplen las siguientes instrucciones de SEGURIDAD, el operador o los transeL_ntes podrian sufrir lesiones graves o la muerte. El propietario de la m&quina deber& comprender estas instrucciones y permitir& utilizar la m&quina L_nicamente a personas que comprendan estas instrucciones.
son lanzados por la cuchilla o interfieren con el funcionamiento del cortacesped. 7. Mantenga personas y animales domesticos lejos de la zona donde va a cortar el cesped. DETENGA inmediatamente las cuchillas, DETENGA el motor y DETENGA el cortacesped en caso de que alguna persona entre en la zona. 8. Compruebe con frecuencia el adecuado funcionamiento y ubicaci6n de protecciones, deflectores, interruptores, controles de la cuchilla y otros dispositivos de seguridad. 9.
RemoJoar 1. Remolque solamente con una maquina que tenga un enganche diseBado para remolque. NO sujete el equipo remolcado a un lugar que no sea el punto de enganche. 2. Siga las recomendaciones del fabricante respecto a los limites de peso para equipos remolcados y remolque en pendientes. 3. NO permita que nihos ni otras personas se suban al equipo remolcado. 4. En pendientes, el peso del equipo remolcado puede causar p@dida de tracci6n y p@dida de control. 5.
GUIA SUGERIDA PARA EL AVISTAMIENTO DE PENDIENTES PARA UNA OPERACiON SEGURA DEL MONTABLE CON ACCESORIO 10 CONDUZCA SOLO HACIA ARRIBA Y HACIA ABAJO POR LA PENDIENTE NUNCA DE UN LADO A OTRO LO 10 GRADOS M.AXIMO ADVERTENCIA: Para evitar lesiones graves, opere la unidad hacia arriba y hacia abjo por la pendiente, nunca de un lado a otro. No opere en pendientes con una inclinaci6n mayor a 10 grados. Gire gradualmente para evitar volcarse o perder el control.
AVlSO: Las figuras e ilustraciones en este manual se proporcionan s61ocomo referencia y pueden diferir de su modelo especifico. L A B K C D J G 14 F A. E Volante B. Control de velocidad del motor (no se muestra) C. Interruptor de encendido D. Pedal del embrague/freno E. Enganche del freno de estacionamiento R Pedal del freno G. Palanca de la cuchilla H. Deflector de descarga J. Control de desenganche K. Palanca de cambios de la transmisi6n L.
Recornendaciones Se recomienda de aceite el uso de aceites certificados marca FULL (LLENO). Encienda el motor y revise que la presion sea adecuada antes de seguir operando. Si el nivel de aceite esta entre las marcas con la garanfia de Briggs & Stratton para un rendimiento optimo. Se pueden aceptar otros aceites ADD (ANADIR) y FULL (LLENO), no encienda el motor. Comuniquese con un concesionario de servicio de Craftsman para corregir el problema de la presi6n de aceite.
C6mo agregar combustible ADVERTENClA vapores La gasolina Antes del arranque 1. Revise la presi6n de los neum&ticos; agregue o libere aire, segQn sea necesario, para alcanzar una presi6n de 6,9 kPa (12 PSi) en la parte y sus son extremadamente inflamables y delantera y 6,9 kPa (12 PSi) en la parte trasera. 2. Revise las protecciones, deflectores y cubiertas para asegurarse de que todas esten en su lugar y firmemente ajustadas. 3. Revise el aceite de motor y agregue aceite, segL_n explosivos.
Arranque del motor | ADVERTENCIA La gasolina _ apores son extremadamente explosives. y sus infiamables y EI fuego o las graves explosiones pueden causar quemaduras o incluso la muerte. Cuando arranque el motor • AsegQrese de que la bujfa, el silenciador, la tapa del dep6sito de combustible y el purificador de aire (si Io tiene) se encuentren en su lugar y esten FIGURA 4 flies. No encienda el motor sin la bujfa.
C6mo ajustar la altura de torte / 1. Ajuste la altura de corte subiendo o bajando la palanca elevadora de la plataforma (A, Figura 8) hasta la altura deseada de la muesca de corte / (B). 2. Cuando haya terminado de cortar el cesped, ajuste la palanca elevadora de la plataforma en la posicion de mb.xima altura, luego detenga la cuchilla. FIGURA 6 e_]m otor ADVERTENCIA NO abandone en funcionamiento. DETENGAla m_.quina la cuchilla.con DETENGA el motor.
IVlecanisrno de bloqueo de marcha atrbs Este tractor cortacesped tiene un mecanismo de bloqueo de marcha atr&s. Este dispositivo evita que el cortacesped se cambie marcha atras mientras la cuchilla este girando. 1. Para cambiar marcha atr&s, detenga la cuchilla soltando el pedal de la cuchilla. 2. Presione completamente el pedal de embrague/ FIGURA freno, luego cambie marcha atr&s. 3. Despues de haber despejado visualmente el &rea detr&s de la m&quina, suavemente suelte el pedal de embrague/freno.
C6rno accionar Desenganche de bloqueo de rnarcha atr_s ADVERTENCIA AM PUTACION PELIGRO El no respetar estas normas personales 11 ) todo el recorrido hacia abajo, deslice el enganche del freno de estacionamiento (B) todo el recorrido hacia dentro y suelte el pedal de embrague/freno. Un seguro en el enganche del freno de estacionamiento mantendr& el freno de podrfa resultar lesiones graves o muerte para el usuario o daSos en propiedades o estacionamiento en el eqwpo.
Tabla de mantenimiento Utilice s61o repuestos originales para el equipo. Es posible que otras piezas no tengan el mismo rendimiento, ademas, pueden dahar la unidad y producir lesiones. Ademas, el uso de otras Carla 8 horas o diariamente Revise el sistema de interbloqueo de seguridad piezas puede anular la garantia. Recomendamos que consulte con algL_n concesionario de servicio de Craftsman para realizar todo el mantenimiento y el servicio de la maquina.
Verificaci6n del sistema de bloqueo de Revise el mecanismo marcha atr_s seguridad _--'] ADVERTENCIA Si la cuchilla no completamente dentro de 3 segundos se se debe ajustar el freno de la cuchilla. NO opere la maquina hasta que el concesionario autorizado haya realizado detiene o menos, [_--'] ADVERTENCIA bloqueo de marcha adecuadamente, de servicio realizado Esta unidad esta equipada con los conmutadores de interbloqueo de seguridad.
Verificaci6n neurn_ticos de la presi6n de los La presi6n de los neumAticos (Figura 13) en forma peri6dica segun la presi6n que aparece especificaciones. Nota: Estas presiones pueden Limpie la bateria y los cables Los bornes, terminales y _ ADVERTENCIA accesorios relacionados con la bateria contienen se debe revisar y mantenerse en la pagina de plomo y compuestos que el estado de California producen cancer y defectos daSos reproductivos. de usarlos.
C6mo mantener C6mo cambiar el aceite del motor El aceite usado es un producto de desecho peJigroso y se debe eJiminar adecuadamente. No Io elimine con los desechos domesticos. Consulte con las autoridades, local para conocer desecho/reciclaje. centro de servicio o distribuidor sobre instalaciones seguras [_ ADVERTENCIA La gasolina _ apores son extremadamente explosivos. y sus infiamables y EI fuego o las graves explosiones pueden causar quemaduras o incluso la muerte.
Antes de almacenaje Antes de guardar la unidad, realice los siguientes pasos: 1. APAGUE la cuchilla del cortacesped, mueva la palanca de cambios de la transmisi6n a neutro (N), aplique el freno de estacionamiento y retire la Ilave desde el interruptor de encendido. 2. Revise los niveles de los liquidos. Compruebe todos los puntos del mantenimiento. 3. Retire la bateria y guardela en un lugar fresco. Recargue aproximadamente una vez al mes.
Localizaci6n de fallas PROBLEIVIA del tractor BUSQUE SOLUCION El pedaldelfrenono est_presionado. Presioneporcompletoel pedaldel freno. El interruptorde tomade fuerza ColOqueloen la posiciOnAPAGADO. (embragueelectrico)seencuentraen la posiciOnENCENDIDO. El controlde cruceroest_accionado. Muevala perillaa la posiciOnde NEUTRO/APAGADO. El motor no funciona ni arranca, Sin combustible. Si el motorest_caliente,dejeloenfriary vuelvaa Ilenarel tanquede combustible. El motorest_ahogado.
Localizaci6n de fallas PROBLEMA del tractor BUSQUE El freno no se mantiene. El frenointernoestadesgastado. La direcci6n del tractor est_i dura o sn manejo es deflciente. Localizaci6n El cortac_spedno se eleva, Consulteaun distribuidorautorizado. El varillajede direcciOnestasuelto. Consulteaun distribuidorautorizado. El infladodel neumaticoes inadecuado. Los rodamientos del eje portamuela delanteroestansecos. Consultela secci6nVerificaci6nde la presi6nde los neumaticos.
Modelo N° 107.280340 Largo total 162,6 cm (64 pulg.) Ancho total 81,3 cm (32 pulg.) Tama_o de la plataforma 71,1 cm (28 pulg.) Altura de corte (5 posiciones) 3,8 a 10,2 cm (1,5 a 4,0 pulg.) Tipo de transmisi6n Transmisi6n de 5 velocidades por discos Presi6n de los neumaticos 12 psi Radio de giro 71,1 cm (28 pulg.
25
Your Home For expert troubleshooting and home solutions advice: home manage www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.
