Owner`s manual

Cage Assembly
WARNING: For your own safety,
never connect plug to power source
outlet until all assembly steps are
complete and you have read and
understood the safety and opera-
tion instructions. Do not operate
vac with any parts damaged or
missing.
NOTE: Your vac is shipped unassembled.
Read the following assembly instructions
carefully.
1. Grasp flexible locking tabs on both the
right and left side of the power head.
Place your thumbs on the drum tabs.
Slowly pull locking tabs away from
drum and press down on the drum
tabs. Lift the power head off the drum.
Flip the power head and place it in the
drum.
WARNING: To avoid personal injury
or damage to vac be sure to keep
hands, fingers, or any other foreign
objects out of the center opening
when assembling the filter cage.
2. Line up filter cage tabs with the slots in
the center ring of the lid.
3. Push on the filter cage until the tabs
snap into the slots for a secure fit. (One
tab at a time)
NOTE: If the filter cage needs to be
removed, use a slotted screwdriver and
insert the blade near one of the tabs
between the filter cage and the center
ring of the lid. Pry the tab out of the slot.
Tilt the filter cage and lift slightly away
from the lid. To replace, follow cage
assembly instructions.
Power Head
Drum
Drum Tabs
Lid
\
Filter Cage
\
_rum
Tabs
J
Tabs (3)
Slots (3)/
Cage
Power
Head
Drum