Operating instructions

6 Slide the handle back into place on electrode holder and
pos_t_on tt untd the hole m handle _s d_rectly over the
head of handle locking screw TLghten the screw
clockwise _ lust enough to secure the handle on
electrode holder
ATTACHING THE WORK CLAMP
TO THE WORK CABLE
1 Attach the terminal on the end of the work cable to the
work clamp•
2 Do not use e_ther of the holes m handle ends of work
clamp.
3 T_ghten the screw hrmly enough to insure good contact
and prevent the cable terminal from shppmg on the
clamp.
4 Remove octagon shaped electrical box from Loose Parts
Bag
Attach _he box to the rear of the we_det cabinet _th
the two sheet metal screws provided These screws must
be bght
Attach the ground terminal to the wall of the electrical
box as shown using zhe 10-32 nut, screw and Iockwasher
provided This connection must be t_ght
• %