Specifications

3. Turn the depth scale clockwise until it stops.

4. Tighten the depth scale lock.

5. The chuck will now be held at this depth when the

feed handles are released.

DEPTH SCALE

LOCK

:ALE

REMOVING CHUCK AND ARBOR

1. With switch off -- adjust depth scale to hold drill

at a depth of (3) three inches. (See instructions for

"Locking chuck at desired depth").

2. Align key holes in spindle and quill by rotating the

chuck by hand, (See illustration)

3, Insert key wedge into key holes.

4, Tap key wedge lightly until the chuck and arbor

fall out of spindle.

NOTE: Place one hand below chuck to catch it when

it falls out,

SPINDLE KEY

HOLE

QUILL KEY

HOLE

ARBOR

LOCKING

COLLAR

CHUCK

SLEEVE

WEDGE KEY

CHUCK

BODY