Owner`s manual

27 DRILL "ON-OFF" SWITCH ... Has locking fea-

ture. THIS FEATURE IS INTENDED TO HELP

PREVENT UNAUTHORIZED AND POSSIBLE

HAZARDOUS USE BY CHILDREN AND

OTHERS,

Insert KEY into swftch.

NOTE: Key is made of yellow plastic.

To turn drill ON ...

Insert finger under switch lever and pull.

z 3=

Dee

To turn drill OFF... Push lever in,

In an emergency;.., the drill bit BINDS... STALLS

• . . STOPS ... or tends to tear the workpiece loose

• .. you can QUICKLY turn the drill OFF by hitting the

switch with the palm of your hand.

To lock switch in OFF position.., hold switch IN with

one hand,.. REMOVE key with other hand.

WARNING: FOR YOUR OWN SAFETY, ALWAYS

LOCK THE SWITCH "OFF" WHEN DRILL PRESS IS

NOT IN USE... REMOVE KEY AND KEEP IT IN A

SAFE PLACE... ALSO . . . IN THE EVENT OF A

POWER FAILURE (ALL OF YOUR LIGHTS GO OUT)

OR BLOWN FUSE OR TRIPPED CIRCUIT

BREAKER, TURN SWITCH OFF . . . LOCK IT AND

REMOVE THE KEY. THIS WILL PREVENT THE

DRILL PRESS FROM STARTING UP AGAIN WHEN

THE POWER COMES BACK ON.