Specifications

basic saw operations

PLOUGHING

PLOUGHING is grooving with the grain the longway of

the workpiece, using the Fence. USE proper hold-

downs al_clfeed devils.

PLOUGHING

BACK OF SAW

It is not necessary to install the outside loose collar

before screwing onthe arbor nut. Make sure the arbor

nutistight and at least one thread onthe arbor st cksout

past the nut.

ALWAYS USE DADO INSERT LISTED UNDER "REC-

OMMENDED ACCESSORIES."

When using the Dado Head it will be necessary to

remove the Blade Guard and Spreader. USE CAU-

TION. USE MITER GAUGE, FENCE, FEATHER-

BOARDS AND PUSH STiCKSAS REQUIRED.

i WARNING: For your own safety, always replace ]

the blade, Guard and Spreader when you are

finished Dadoing.

SAW ARBOR

iiZ!coLLF

NUT

_REMOVE SAWBLADE AND

INSTALL DADO HEAD

ma ntenance

] WARNING: Toavoid lnjuryfrom accidentalstart, I

I turn switch OFF" and remove plug from power

I source outlet before maintaining or lubrl_ing

I your saw.

Do not allow sawdust to accumulate inside the saw.

Frequently clean yourcuttingtoolswith Craftsman Gum

and Pitch Remover.

slide more freely.

itthe power cord is worn, cut, or damaged in anyway,

have it replaced immediately.

Make sure the teeth of the And-Kickback Pawls are

always sharp. To sharpen:

1. Identify the dull tooth orteeth_ Remove Blade Guard.

comer of workbench.

4. Sharpen the dull tooth using a few light strokes of a

fine-cut file.