Owner`s manual

Alignment (Adjustments) (continued) ....
WARNING: To avoid injury from
accidental starting, always turn
switch "OFF and unplug power
cord from outlet before removing
or replacing the blade.
Loosen tension on blade by turning ten-
sion knob counterclockwise
about three full turns.
• Loosen the upper b_ade holder by turn-
ing the knob on the holder counter-
clockwise _ so the jaws open.
• Remove blade from upper blade
holder,
. Loosen the lower blade holder knob in
the same way as the upper blade
holder in step 2, To make lower b;ade
holder access easier, tilt the table to
45° and raise the arms to the up posi-
tion using a screwdriver to rotate the
motor shaft.
• Remove blade from tower blade holder.
Loosen
Loosen
Upper
le
Holder
Lower Blade
Holder
16