Owner`s manual

FeedtheworkpiecebyhandalongtheAUXILIARY
FENCEuntilthe endisapprox.1in. pastthefront
edgeof thetable.ContinuetofeedusingthePUSH
BLOCK.
HoldtheworkpieceinpositionandinstallthePUSH
BLOCKby sliding it on top of the AUXILIARY
FENCE/WORKSUPPORT(ThisMayRaiseGuard).
NarrowstripsthickerthantheAuxiliaryFence/Work
Supportmayentertheguardandstrikethe baffle.
CAREFULLYraiseguardonlyenoughto clearthe
workpiece.UsePUSHBLOCKtocompletecut.
BAFFLE
AUXILIARY FENCEr
WORK SUPPORT
CUTTING PANELS
When cutting panels (whenever fence is positioned
outside of table surface), ALWAYS use the
AUXILIARY FENCE/WORK SUPPORT.
1. Unlock fence and raise rear end.
2. Position AUXILIARY FENCE/WORK SUPPORT
as shown and attach it with two "C" clamps. . J"
/
35