Owner's Manual

BEVEL RiPPiNG

When bevel rippingmaterial 6 inches or narrower, use

Fence on the right side of the blade ONLY. This will

providemorespace betweenthe Fence andthe sawblade

for use of a Push Stick. Ifthe Fence ismounted to the

left, the Sawblade Guard may interfere with proper use

of a Push Stick.

Keep your hands out of the blade path. Feed the

workpiece by pushing forward only on the part of the

workpiece that will pass between the blade and fence.

Stop your thumbs at the front edge of the table.

Finishthe cut with the appropriate pusher.

Once the tralUng end is on the table:

When"WI DTH OF RiP" is 2incheswide ormore, usethe

PushStickto finishpushing the work allthe way past the

blade.

When thru-sawing a rip 1/2 inchto 2 inches wide, the

Push Stick CANNOT be used because the Guard will

interfere. USE the Auxiliary Fence/Work Support and

Push Block.

AttachAuxiliary Fence/Work Supportto Rip Fence with

two "C" clamps.